SiriusXM XDNX1V1 Guide de l'utilisateur télécharger pdf (Page 13)

Step 2: Install the Dash or Vent Mount

Depending on your situation, you can either choose to use the Dash Mount

or the Vent Mount.

IMPORTANT! When you install the chosen mount, do not attach the dock

to the mount. All cables should be attached to the dock prior to

connecting the dock to the mount.

Installing the Dash Mount:

CAUTION! The adhesive used on the Dash Mount may be

difﬁcult to remove. Do not install this mount on leather

surfaces (contact your vehicle dealer if you are unsure about

your dash surface), and make sure the air temperature is at

least 60°F (15°C) during installation. If it’s not at least 60°F,

turn on the heater in your vehicle to bring the temperature

up to 60°F.

1 Locate a flat surface for the Dash Mount. Make sure there is ample

room for the PowerConnect Vehicle Dock and Onyx Radio when

installed.

2 Set the orientation of the Dash Mount before adhering it. Loosen

the knob and adjust the adhesive foot for the location you selected

in “Step 1: Choose

a Location for Your

Radio” on page 11:

•Option 1 & Option 3

should be oriented

as I.

•Option 2 should be

oriented as II.

Vehicle Installation

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 93 94

Pas de commentaire

SiriusXM XDNX1V1 Guide de l'utilisateur Page 13